Auber WSD-1203CPH 작동 및 사용 설명서 - 페이지 3

{카테고리_이름} Auber WSD-1203CPH에 대한 작동 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber WSD-1203CPH 12 페이지. Programmable pid temperature controller with dual probe

페이지 인쇄

intermittently to reduce the power output. It should be synchronized with the power

light on the cooking device.

4) Smoker generator control output status indicator. When lit, the smoker

generator control output is on. When off, the output is off.

5) Timer status indicator - When lit, right window shows the time passed since

power up. When it is off, right window shows the current temperature detected by

the probe 2.

6) SET Key - For showing current temperature settings, entering parameters setting

mode and confirming various actions taken.

7) "-" Key - To decrement displayed values when controller is in the parameter

setting mode. During normal operation, press it to cancel the alarm.

8) "+" Key - To increment displayed values when controller is in the parameter setting

mode. During normal operation, pressing it will change the left window from

temperature to display which step the program is at.

9) Time Key - Changes the display in the right window between current timer and

temperature values.

2. Connecting and operating the controller

Install the sensor.

(Note: If you ordered wall mount sensor instead of free hanging sensor, please see the

separate instruction in the CD for its installation)

Figure 2. Back Panel