Auber WS-1500FXL 작동 및 사용 설명서 - 페이지 2

{카테고리_이름} Auber WS-1500FXL에 대한 작동 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber WS-1500FXL 3 페이지. High precision deluxe sous vide cooking controller

AUBER INSTRUMENTS

Instruction Manual

Figure 2. Back Panel

3. Connecting the controller

Figure 3. Typical connection between the controller and

the heating device (in this example, the cooker).

The connection of the controller should be done in the following

steps.



Plug the temperature sensor to the back of the controller.



Plug the power cord to the power outlet on the wall.



Turn on the controller to make sure the controller powers up

properly, and the temperature display is in the range

expected. Then, turn off the controller.



Plug the heater to the back of the controller. If the heater

has a switch, put it in the off position. Put the sensor

inside the container to be controlled.



Turn on the controller.



Turn on the heating device.

Remark The connector of sensor contains a slot for correct pin

connection. It also has a spring lock to prevent disconnections

from accidental pulling on the cable. The following pictures show

how to install and remove it.

2014.02

Fig 3a. How to install the sensor. ( back panel picture is different for

this model)

Fig 3b. How to remove the sensor. （back panel picture is

different for this model）

WWW.AUBERINS.COM

P2/3