2B Warm PN1000G 사용 설명서 - 페이지 2
{카테고리_이름} 2B Warm PN1000G에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2B Warm PN1000G 8 페이지. Panel glass convection heater
페이지 인쇄
Introduction
To get the most out of your new heater, please read through these instructions and the
attached safety regulations before use. Please also save the instruction manual in case
you need to remind yourself of the heater's functions at a later date.
Technical Specification
Details
PN1000G
Voltage
220-240V
Frequency
50/60Hz
Power
500/1000W
IP Waterproof
Important
Before plugging the unit into the mains, ensure by visual inspection that the unit is intact
and has not suffered any damage during transit.
Caution
The appliance must be always placed on a flat and stable surface.
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
For your own safety
1. Read all instruction before using the heater.
2. Only connect the heater to a single-phase socket with a mains voltage as specified on
the rating plate.
3. Do not leave your home long time while the appliance is in function: ensure that the
switch is in OFF (0) position and the thermostat is in minimum position. Always unplug
the appliance.
4. Keep combustible material such as furniture, cushions, bedding, paper, clothes,
curtains etc. at least 100cm away from the heater.
5. Do not hand anything on or in front of the heater.
6. Always use the heater in an upright position.
7. Do not use the appliance in rooms less than 4m² area.
8. Always unplug the heater when not in use long time. Do not pull the cord to unplug the
heater.
9. Keep the air inlet and outlet free from objects at least 1m in front and 50cm behind the
heater.
10. Do not install the heater immediately below a socket- outlet.
11. Do not let animals or children touch or play with the heater. Pay attention the air outlet
gets hot during operation.
12. Do not cover. If covered, there is the risk of overheating.
PN1500G
220-240V
50/60Hz
750/1500W
IP24
PN2000G
220-240V
50/60Hz
1000/2000W