Auber Instruments SYL-1512A 사용 설명서

{카테고리_이름} Auber Instruments SYL-1512A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber Instruments SYL-1512A 7 페이지.

SYL-1512A PID TEMPEARATURE CONTROLLER INSTRUCTION MANUAL

www.auberins.com

·Wiring precautions

-Install an external protection circuit if failure of this instrument could result in damage to your system.

-In order to prevent instrument damage or failure, protect the power line and the input/output lines from

high currents by using fuses with appropriate ratings. A very fast blowing fuse (such as an I

needed when the output device is a solid-state relay (SSR). Please check with your fuse supplier for the

correct fuse for your SSR.

·Power supply

-Supply power of the specified rating.

-Do not turn on the power until all of the wiring is completed.

-Never use this instrument in the presence of inflammable gases or vapor.

-In order to prevent electric shock or burns, never touch the inside of the instrument.

-Do not attempt to modify this instrument.

·Maintenance

-Only authorized service engineers should replace parts.

-In order to use this instrument continuously and safely, conduct periodic maintenance. Some parts used

in this instrument have a limited service life and may deteriorate over time.

Caution

·Only clean the instrument when power is off.

·Please use a soft cloth or tissue to clean up stains on the display.

·Never use sharp & hard objects such as screwdrivers or ball pens to touch the buttons on the panel.

=============================================================

◆ Compact size, 1/32 DIN that is only 24 x 48 x 75 mm (1x2 x3")

◆ Supports 10 different types of commonly used temperature sensors, including Pt100 and Cu50 RTDs，

T、R、J、B、S、K、E、and WRe3-WRe25 thermocouples.

◆ The PID control output can be configured by user for either relay contact or SSR.

◆ The relay contact output can also be configured as the alarm output, or on/off control

◆ Auto-tune function can automatically find the best PID parameters.

◆ Temperature can be displayed in Fahrenheit and Celsius.

◆ Can be used with either DC or AC power source.

2. Specification

◆ Power supply：85～260VAC or 85～360VDC

◆ Power consumption：<2W

◆ Sampling rate：4 sample/sec

◆ Accuracy：0.2% full scale

Version 2.2, July. 2007

Auber Instruments, 730 Culworth, Alpharetta, GA 30022

e-mail: [email protected] Tel: 770-569-8420

WARNING

Figure 1

t fuse) is