Auber Instruments WS-1211GPH 빠른 매뉴얼 - 페이지 2
{카테고리_이름} Auber Instruments WS-1211GPH에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber Instruments WS-1211GPH 12 페이지. Programmable precision pid temperature controller
페이지 인쇄
hot. The controller will provide full power to the heater. It will not only overheat the
controller, but also damage your appliance or even cause a fire. If the sensor is not
permanently mounted on the system and left outside of the system, there is a potential
problem. If no sensor is connected to the controller, as protection, this controller will
turn off its output to your controlled subject.
•
This controller is designed to control the devices recommended by Auber Instruments only.
Using it to control a not recommended device can be dangerous and even cause fire.
Auber Instruments is not liable for damages caused by misuse of the controller. If you are
not sure the controller can be used, please contact Auber Instruments before usage.
•
If an abnormal display or noise is observed, turn the controller off, unplug the power cord
and contact the manufacturer before using it again.
•
Clean the controller only when it is cool and unplugged.
•
Do not allow children to operate the controller.
Operating Instructions
1. Description of the controller
The front panel of the controller is shown in Figure 1. The function of each item is described below:
Figure 1. Front Panel.
2