Abstract Data ADE-60 사용자 설명서 - 페이지 7
{카테고리_이름} Abstract Data ADE-60에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-60 17 페이지. 4:4 mix utility
Abstract Data ADE-60에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)
페이지 인쇄
5) Inputs & Outputs
1) IN: 1-4
The ADE-60 has 4 inputs – 1 for each of the 4 mixer channels.
All inputs and the entire internal signal path is DC-coupled and will work with all standard signals
in the Eurorack environment from DC voltages and CV to audio signals.
2) OUT: 1-4
The ADE-60 has 4 outputs – 1 for each of the 4 mixer channels.
The module's internal routing is cascaded – so an input signal at any channel (e.g. CH1) will appear
at that output and all outputs that follow it (e.g. CH2, 3, 4) until the signal reaches a channel that has
its output socket connected to a patch cable.
An output socket that is connected to a patch cable will output the summed signal of its own channel
and all previous channels with patched inputs but unpatched outputs.
This cascading design allows for any configuration from a single 1-input / 1-output summing mixer
to 4 individual 1-input / 1-output attenuators or any combination in between.
Cascading is also used in patches that require 2 channels to implement e.g. the bias and attenuation
combo that uses 1 channel (e.g. CH1) for the bias/offset and one (e.g. CH2) for attenuation.
>> For more information on patch examples see Sections 9.1, 9.2, 9.3 and 9.4
3) SIGNAL CASCADING
Internal signal cascading
© Abstract Data Ltd.
Signal 1: IN
Signal 1: OUT
example 1
Internal signal cascading
example 2
Page 5 of 15
Signal 1: IN
Signal 1: OUT
Signal 2: IN
Signal 2: OUT
Signal 3: IN
Signal 3: OUT
Version 1.1.0