Abstract Data ADE-60 사용자 설명서 - 페이지 6

{카테고리_이름} Abstract Data ADE-60에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-60 11 페이지. 4:4 mix utility
Abstract Data ADE-60에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄
Abstract Data ADE-60 사용자 설명서

4: Quick Start

1) USER CONFIGURATION
Make sure all 12x black plastic jumper jonnectors are in place on the rear Printed Circuit Board (PCB)
on the left hand pair of the 3x pin headers.
2) INPUTS
Turn all 4x knobs fully counter-clockwise.
Connect an audio signal to IN:1
3) OUTPUTS
Connect the output of channel 4 to a suitable audio monitoring source.
Turn the VOLUME:1 knob clockwise to increase the volume of the signal at IN:1 to unity gain
(at fully clockwise).
The audio signal at IN:1 is available at OUT:1-4.
Connecting a patch cable to OUT:1 will remove the signal at IN:1 from OUT:2-4.
Connecting a patch cable to OUT:2 will remove the signal at IN:1 from OUT:3-4.
© 2017 Abstract Data Ltd.
Page 4 of 8
Version 1.0 October 2017