AIRTRONICS Aero Fixed Wing SD-10G 빠른 설정 매뉴얼 - 페이지 5

{카테고리_이름} AIRTRONICS Aero Fixed Wing SD-10G에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRTRONICS Aero Fixed Wing SD-10G 8 페이지. Aero fixed win

section 2: naMinG YoUr Model

After saving your Model Type selection options, it's time to name your model. The Model Name function allows you to name each

of your individual models. This makes it easy to keep track of multiple models. When you select a model, all of the programming

for that model is loaded. The Model Name can consist of up to 8 letters, numbers, or symbols. Choose from capital letters, lower

case letters, numbers, and various symbols.

For more detailed information about using the Model Name function, see the following section in your SD-10G User's Guide:

Model Naming ...................................................................................Page 30

To name your model, follow the steps below:

1) With the transmitter turned 'ON', navigate to the SYSTEM>MODEL NAME menu.

2) Press the Navigation Pad 3456 to highlight a character, then press the ENTER key to select the highlighted character.

That character will be displayed and the underline will move to the next space.

3) Repeat step 2 to enter the rest of the characters. Up to eight characters can be entered. The name of your model will

be displayed near the top of the screen (i.e. 01:Xtra300S).

section 3: BindinG tHe transMitter and receiver

After saving your Model Type selection options and naming your model, it's time to bind the transmitter and receiver. When new,

it is necessary to pair the transmitter and receiver to prevent interference from transmitters operated by other users. This operation is

referred to as 'binding'. Once the binding process is complete, the setting is remembered even when the transmitter and receiver

are turned 'OFF', therefore, this procedure usually only needs to be done once.

For more detailed information about binding the transmitter and receiver, including changing the Modulation Type and using the

Safety Link feature with FHSS-3 receivers, see the following sections in your SD-10G User's Guide:

Changing Modulation Type.........................................................Page 34

Safety Link ............................................................................................Page 34

Binding ...................................................................................................Page 35

The Safety Link function is used to program a unique bind code to each receiver/model pair, preventing the transmitter from

controlling a model that it's not currently programmed for. This feature is only supported when used with FHSS-3 receivers.

To bind your transmitter and receiver, follow the steps below:

1) Turn the transmitter 'ON' and navigate to the SYSTEM>MODULATION menu.

2) Highlight the MODULATION option, then press the YES/+ or NO/- keys to choose the desired Modulation Type. If you're

using an Airtronics FHSS-3 receiver, such as the 92104 10-Channel receiver, choose FH3. If you're using an Airtronics

FHSS-1 receiver, such as the 92674 7-Channel receiver, choose FH1.

3) Hold down the Bind Button on the receiver. While holding down the Bind Button on the receiver, turn the receiver 'ON'.

4) Release the Bind Button on the receiver. The Bind LED will slowly blink.

5) Scroll down to TRANSMIT BIND CODE, then press the YES/+ key. The Bind LED on the receiver will blink rapidly.

6) After the Bind LED on the receiver stops blinking rapidly, press the END key. The Bind LED will turn solid, indicating that

the transmitter and receiver are now paired and the binding process is complete.

After naming your model, you can now plug your servos, receiver battery and switch harness into the receiver, then mount your

receiver into your model and route the antenna wires.

For more detailed information about connecting your airborne components to the receiver, see the following section in your SD-10G

User's Guide:

Airborne System Connections ...................................................Page 20

Website: www.airtronics.net

| Phone: (714) 963-0329