3onedata MES600 Series 빠른 설치 매뉴얼 - 페이지 3
{카테고리_이름} 3onedata MES600 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3onedata MES600 Series 3 페이지. Managed industrial ethernet switch
페이지 인쇄This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Click "OK" button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device is
"admin12345".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specifications】
Panel
100M fiber ports
100Base-FX
10/100Base-T(X) self-adapting
RJ45 port, full
100M copper ports
duplex/half-duplex self-adaption
or forced working mode, support
MDI/MDI-X self-adaption
CLI command management port
Console port
(RS-232), RJ45
2-pin 7.62mm pitch terminal
Alarm interface
block, support 1 relay alarm
information output.
Power indicator, run indicator,
Indicator
interface indicator, alarm
indicator and serial port indicator
Power Requirements
12 ~ 48VDC;
Support dual redundant power
Input power supply
supply, non-polarity;
Support built-in 2.0A overcurrent
protection.
4-pin 7.62mm pitch terminal
Access terminal
blocks
Switch Properties
Switching bandwidth
1.6G
Packet buffer size
3Mbits
MAC table size
8K
Consumption
No-load power
consumption:
8.54W@24VDC
MES600-4T4F-4D
Full-load
consumption
9.34W@24VDC
MES600-4T4F
Environmental Limits
Working temperature
Storage temperature
Working humidity
Protection grade
power
No-load power
consumption:
7.75W@24VDC
Full-load
power
consumption
8.47W@24VDC
-40~85℃
-40~85℃
5%~95% (no condensation)
IP40 (metal shell)