Abstract Data Event Boss ADE-33 사용자 설명서 - 페이지 5

{카테고리_이름} Abstract Data Event Boss ADE-33에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data Event Boss ADE-33 16 페이지. Rhythm and pattern creation and manipulation

페이지 인쇄

3) Rear Connections

POWER CONNECTION:

FTDI PORT:

ICSP PORT:

PRECAUTIONS:

POWER CABLE

RED STRIPE

10-16 pin Eurorack power connection

Firmware upgrade port

Factory programming port

Only connect the power cable to the power connection as shown.

DO NOT CONNECT THE POWER CABLE TO ANY OTHER PORT!

The ADE-33 uses the Doepfer standard for power connection and cable orientation.

The RED stripe on the supplied power cable connects to the NEGATIVE (-12V) rail

on the ADE-33 with the RED stripe facing DOWN. This is marked on the back of

the ADE-33 PCB as "– RED".

The ADE-33 has diode and polyfuse protection built in but an incorrectly connected

cable may still cause permanent damage to the module or the power supply.

The rear panel of the ADE-33 has exposed parts and connections. Please ensure

when handling the ADE-33 that the unit is held by the sides of the front panel or

the sides of the PCB (Printed Circuit Board).

Page 3 of 13

Version 1.0.1