페이지 인쇄
INSTRUCTIONS
EMX4 REMOTE KEYPAD
Mounting Kit
1 Description
The remote keypad can be mounted up to 3 metres away from the soft starter. The
keypad is rated IP65 when mounted correctly in accordance with these instructions.
The keypad connects to the soft starter via the DB9 connector on a hardware
expansion card. A hardware expansion card must be installed to use the remote
keypad with the starter. Separate kits are available with a dedicated keypad
connector expansion card, or with no expansion card for applications already using
another smart card.
2 Packing List
1 x Remote keypad
1 x Keypad connector expansion card
(selected kits)
1 x Cable, DB9
1 x Gasket, foam
1 x Instruction sheet
3 Warnings
WARNING
For your safety, isolate the soft starter from mains voltage before
attaching or removing accessories.
WARNING
Inserting foreign objects or touching the inside of the starter while
the expansion port cover is open may endanger personnel, and can
damage the starter.
EMX4 Remote Keypad | Rev A 4/2016
4 x M3 x 16 Screw
4 x M3 Flat washer
4 x M3 Spring washer
4 x M3 Nut
2 x Jack screw