daltile 828 BrS 운영 매뉴얼 - 페이지 15
{카테고리_이름} daltile 828 BrS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. daltile 828 BrS 16 페이지. Tile saw
페이지 인쇄MAINTENANCE
General Maintenance
Saw Flanges
The cooling water should be replaced
and/or replenished regularly.
It is recommended to clean the water con-
tainer, pump, hoses and spray nozzle on a
regular basis. For example, place the
pump in a bucket of clean water after the
sawing job and run the machine for a
minute or so. This also guarantees
a longer lifetime of the pump.
Water Pump
When the machine is not used for a longer
period, the pump should not remain in the
muddy cooling water. Cleaning the pump
as described above and leaving it outside
the water container is recommended.
Regularly check the saw flanges for wea-
ring out and replace if necessary.
DALTILE 828 BrS OPERATING MANUAL V02/2004R1 PAGE 15