daltile DAD2 운영 매뉴얼 - 페이지 5
{카테고리_이름} daltile DAD2에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. daltile DAD2 12 페이지. Angular tile drill
daltile DAD2에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)
페이지 인쇄KEEPING THE WORK AREA CLEAN.
It is important that the working area be
clean so as to avoid potential accidents or
injuries.
DO NOT USE THE EQUIPMENT IN
DANGEROUS ENVIRONMENTS.
It is important that power tools not be used
in wet environments. The equipment
should never be used in the rain. Also, it is
advisable to keep the working area well lit.
CHILDREN SHOULD BE KEPT AWAY
FROM THE WORKING AREA.
Only the operator of the equipment should
be in the working area. All other people
especially children should be kept away at
a safe distance.
KEEP THE WORKING AREA CHILDPROOF.
It is important to keep the working area
child proof. This can be done by using
locks on the equipment, plastic plugs for
the electrical outlets and possibly even
master switches on the equipment.
DO NOT DRY DRILL WITH THE MACHINE
The machine is not intended for dry dril-
ling use. Always use sufficient water to wet
drill tile, brick or natural stone. Dry drilling
will result in dangerous dust levels (See
also California Proposition 65 message)
and can damage the equipment. Any
damaged equipment that is returned due
to dry drilling will be repaired or replaced
totally at the customers expence. There
will be no warranty claim.
FORCING THE TOOL.
The equipment was designed to do a
certain job. Do not force the equipment to
do something that it wasn't designed to do.
DALTOOL SAFETY
CLOTHING.
It is important that the operator does not
wear loose clothing that can potentially get
caught in moving parts of the equipment.
It is recommended to wear non-slip shoes
along with a hair covering to keep hair
away from the moving parts.
SAFETY GLASSES AND HEARING
PROTECTION.
It is important to wear safety
glasses and hearing protection
when operating any type of
equipment. Be sure that the
safety glasses you wear are
impact resistant.
SECURE WORK
Clamps or a vise should be used to hold
your work whenever practical. Keeping
your hands free to operate the machine is
safer. When securing the material to be cut
by hand, be sure your hands stay as far
away as possible from the rotating dia-
mond Bit
PROPER FOOTING
It is important to keep proper footing and
balance at all times when operating equip-
ment. If proper footing is not observed by
doing such things as overreaching, serious
injury may occur.
DALTILE DAD2 OPERATING MANUAL V09/2005R1 PAGE 5