daltile DG5 운영 매뉴얼 - 페이지 6
{카테고리_이름} daltile DG5에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. daltile DG5 12 페이지.
페이지 인쇄TOOL MAINTENANCE.
It is important to keep tools clean and in
good working order. This will result in
optimal performance of the machine.
Always follow the maintenance instructions
for proper tool maintenance.
REDUCING ACCIDENTAL STARTING OF
MACHINE
It is important to be sure that the
switch is in the OFF position
before plugging in the machine.
EQUIPMENT ACCESSORIES.
It is important that you refer to the owner's
manual for determining what are the
recommended accessories to use with this
type of equipment. Using accessories that
are not recommended in the owner's
manual may increase the risk of personal
injury and/or to people that are within
close proximity of the machinery.
CHECKING THE EQUIPMENT FOR
DAMAGED PARTS.
It is important to inspect the power tool
before using it to check for damaged
parts. Any part of the machinery that is
damaged should be checked carefully to
determine whether or not it should be
used and whether or not it can function
properly for its intended use.
PAGE 6 DALTILE ANGLE GRINDER OPERATING MANUAL V09/2005R1
DALTOOL SAFETY
It is important to check all the moving parts
of the machinery for proper alignment and
/or possible binding. All broken or dama-
ged parts should be properly repaired or
replaced. If these parts are not repaired
or replaced the proper operation of the
machine could be negatively affected.
NEVER LEAVE A TOOL RUNNING
UNATTENDED – TURN POWER OFF
It is important never to leave a tool running
when not in use.