Conair 1600 사용 설명서 - 페이지 8
{카테고리_이름} Conair 1600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Conair 1600 8 페이지.
페이지 인쇄
ADDITIONAL INFORMATION
FOR DUAL-VOLTAGE DRYERS
For use in North America, the voltage selector
switch should be placed in the 125V
position. For use in several countries
overseas, the voltage selector may need to be
placed in the 250V position. Confirm the volt-
age available at each overseas location before
using the appliance. For connection to a 220-
250 volt supply, use an attachment plug
adapter of the proper configuration for the
power supply receptacle.
For 110-125 Volt Operation
Flick the dual voltage switch to the
125V position. In this position, the dryer
operates in all available heat and speed
settings.
For 220-250 Volt Operation
First put the HI-LO switch into LO. Flick the
Dual voltage switch to the 250V position. At
250V while set at LO, the dryer operates only
at high speed with high heat. Do not attempt
to operate the HI-LO switch or change to
125V when operating on 250V. The switches
must be set and remain in the LO and 250V
positions. A plug adapter may be necessary in
certain countries.
USER
MAINTENANCE
Your dryer is virtually maintenance free. No
lubrication is needed. For proper operating
performance, the dryer must be kept clean.
When cleaning is needed, unplug the cord,
and clean dust and lint from air intake open-
ings with a small brush or the brush attach-
ment of a vacuum cleaner. The outer surface
of the dryer should be wiped clean with a
damp cloth only.
Blocked or clogged air intake vents will
cause the dryer to overheat. If overheating
occurs, an automatic safety device will shut
the dryer or the heat off to prevent damage or
personal injury. If the unit or the heat cycles
off, unplug the cord and allow the dryer to
cool for 10 to 15 minutes before restarting.
Make sure the air vents are clean.