Conair TT228C 사용 설명서 - 페이지 8

{카테고리_이름} Conair TT228C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Conair TT228C 8 페이지. Nano titanium tourmaline ceramic styler

USER MAINTENANCE

Your dryer is virtually maintenance free. No

lubrication is needed. For proper operating

performance, the dryer must be kept clean.

When cleaning is needed, unplug the cord,

allow to cool and clean dust and lint from air

intake openings with a small brush or the brush

attachment of a vacuum cleaner. The outer

surface of the dryer should be wiped clean

with a cloth only.

Blocked or clogged air intake vents will

cause the dryer to overheat. If overheating

occurs, an automatic safety device will shut

the dryer or the heat off to prevent damage

or personal injury. If the unit or the heat turns

off, unplug the cord and allow the dryer to

cool for 10 to 15 minutes before restarting.

Make sure the air vents are clean.

CAUTION

NEVER allow the power supply cord to be

pulled, twisted, or severely bent. Never wrap

the cord tightly around the dryer. Damage will

occur at the high flex point of entry into the

dryer, causing it to rupture and short. Inspect

the cord frequently for damage. Stop use im-

mediately if damage is visible or unit stops

or operates intermittently.

If the cord or dryer is damaged or does not

operate properly, return it for repair to an

authorized Conair service representative

only. No repairs should be attempted by the

consumer.

STORAGE - Important

When not in use, your dryer should be discon-

nected, allowed to cool and stored in a safe,

dry location, out of reach of children. Do not

wrap line cord around dryer. Allow the cord

to hang or lie loose and straight at the point

of entry into the dryer.