AIRTUG 10-H 조립 및 작동 지침 - 페이지 4

{카테고리_이름} AIRTUG 10-H에 대한 조립 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRTUG 10-H 4 페이지.

Airtug® /

Step 3: Attach the transmission cable end to the left hand

grip with the "ball" on it. Then open the nuts located

several inches from the hand grip on the cable and slip

the cable between the bracket on the left side of the

handle and then secure the nuts ﬁrmly using an 11/16"

wrench.

Note: Using the zip ties provided, secure both cables to the

handle towards the bottom of the handle loosely.

Winch Operation

1. Ensure the strap is always over the top of the winch wheel. If you notice it on the bottom - pull the

strap all the way out and wind it back in so the strap is positioned over the top of the winch wheel.

2. When loading an aircraft, press the lock lever towards the handle and frame to the down position

and pull the strap out towards the front of the tug. You should hear the winch clicking throughout

this action.

3. Connect the strut strap around the nose gear or the "J" hook (if purchased as an option) - connect

to the hook at the end of the strap. Position the winch lever to the straight up position (locked) and

load the aircraft onto the tug by cranking the winch handle clockwise. You are now ready to move

the aircraft.

NOTE: Particularly with the 10-H model, always verify the winch strap tension prior to moving the aircraft.

10-S & 10-H Assembly & Operating Instructions / 7-17-17

AIRTUG®, LLC,

1350 CHESTER INDUSTRIAL PKWY,

AVON, OH 44011

1-216-941-9781

WWW.AIRTUG.COM

/ 216-941-9781 / www.airtug.com