AIRTUG TT-HD-EM-15 조립 및 작동 지침 - 페이지 5

{카테고리_이름} AIRTUG TT-HD-EM-15에 대한 조립 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRTUG TT-HD-EM-15 5 페이지. Trailer tugs

CAUTION:

* Read, study and understand all warnings and operating instructions prior to use

* When working on the tug:

* Put the tug up on blocks to get the drive wheels off the ground before beginning any work.

* Do not allow anyone to stand directly in front of or behind the vehicle during testing.

* Make sure the Power switch is off.

* Use well-insulated tools.

* Runaways - Some conditions could cause the tug to run out of control. Disconnect the motor, or

jack up the tug, and get the drive wheels off the ground before attempting any work on the motor

control circuitry.

* High Current Arcs - Electric vehicle batteries can supply very high power, and arcs can occur if they

are short circuit. Always turn off the battery circuit before working on the motor control circuit. Wear

safety glasses, and use properly insulated tools to prevent short circuit.

* Do not overload this tug beyond the rated capacity.

* This tug is designed for use only on hard level surfaces capable of sustaining the load.

* No alterations to the tug shall be made.

* Electronic components may be damaged if exposed to water! This is not covered under warranty. 

Failure to heed these warnings may result in personal injury and/or property damage.

TT-HD-EM-15 & TT-HD-EA-15 Assembly & Operating Instructions Rev 1 / 8-16-19

Airtug® /

www.airtug.com

/ 216-941-9781 / www.airtug.com