dams Elev82 Touch EVTB-1200 조립 지침 매뉴얼 - 페이지 10

{카테고리_이름} dams Elev82 Touch EVTB-1200에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dams Elev82 Touch EVTB-1200 13 페이지. Back-to-back desks

Step 16

Now position the desktop onto

the framework ensuring that the

scalloped edge of the desktop is

at the centre of the frame.

Align the holes in the desktop

end rails with the pre-drilled

holes on the underside of the

desktop.

Use the wood screws supplied

to attach the top to the frame, if

you are using a cordless/power

driver make sure it is on a low

torque setting.

NOTE

Use Ø5 x 20mm wood screws to

attach the top to the frame.

Step 17

Finally attach the desktop

controller to the underside of

the desktop using the wood

screws provided. If you are using

a cordless/power driver make

sure it is on a low torque setting.

There are pre-drilled holes on

either side of the top so the

controller can be attached to the

Left or Right of the desk.

NOTE

Use Ø4 x 25mm wood screws to

attach the controller to the top.

NOTE

If the holes don't line up,

loosen the grub screws

and adjust the width of the

frame before re-tightening

the grub screws.