Dan D'Agostino Relentless 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Dan D'Agostino Relentless에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dan D'Agostino Relentless 14 페이지.
페이지 인쇄
D I G ITAL I N PUT S ELEC TI O N FRO M TH E FRO NT PAN EL
Once the optional Digital Streaming Module is installed in the Relentless Preamplifier, Input 5 is now
used to select digital inputs. Pressing the Input 5 button will cycle through the various digital inputs.
Input 5 defaults to the analog input and will return to analog input operation after cycling through the
digital inputs.
1.
Press the Input 5 button to select the Network Digital input.
The numeric display will briefly show S, the abbreviation for streaming sources.
2. Press the Input 5 button again to select the USB digital input.
The numeric display will briefly show U, the abbreviation for the USB input.
3. Press the Input 5 button again to select the coaxial digital input.
The numeric display will briefly show C, the abbreviation for the coaxial input.
4. Press the Input 5 button again to select the optical digital input.
The numeric display will briefly show O, the abbreviation for the optical input.
5. Press the Input 5 button again to return to the analog Input 5 source.
The numeric display will briefly show A, the abbreviation for the analog input.
If an analog input is then selected, the next time the Input 5 button is pressed, the previously
active digital input will be selected. The above Input 5 button press cycle will then be followed
on subsequent Input 5 button presses.
Note: All digital inputs are directly accessible when using the iOS Relentless Preamplifier App or
Remote Control.
Using the Relentless Preamplifier with Roon
The Relentless Preamplifier is Roon ready. You will need a Roon account and the
Roon Core installed on your NAS or connected computer. Being Roon Ready
means that the Relentless Preamplifier uses Roon streaming technology, for an
incredible user interface, simple setup, rock-solid daily reliability, and the highest levels of audio
performance, without compromise. The Roon remote can now be used to manage your network,
Tidal, and Qobuz music playback. See Roonlabs.com for more information.
1 4
Operating the Relentless Preamplifier via the app
The app allows control of all the basic and advanced functions of the unit.
Player screen
When you enter the app, the player screen will appear. The player page
includes music transport controls, standby, balance, and access to other
screens. Cover art replaces the D'Agostino logo when a music file is selected.
Volume: To adjust the Relentless Preamplifier's volume, move the slider to
the right to raise the volume, or left to lower the volume.
Control screen
Press the (
) button to access the Control screen.
Standby: This button changes the unit for the power on to standby and
the reverse.
Zone 1 and Zone 2: The Relentless Preamplifier defaults to Zone 1 and the
Zone 1 button will illuminate on the app. To control Zone 2, press the Zone 2
button and then all unit controls will be for Zone 2 operation. Press the
Zone 1 button to return to Zone 1 control.
Balance: Move the slider to the left to adjust the balance to the left and
move the slider to the right to move the balance to the right. Press the word
balance to restore center balance.
Source Selection: Press one of the input buttons (Analog inputs 1-5, Coaxial, Optical, USB, or
Network) to select these sources. For network-based and internet listening, first select the Network
input. Press the Stream button to access network-based and Internet sources, such as Spotify, Tidal,
Qobuz, and NAS drives.
Optical: Press this to use the Toslink optical digital input on the back of the Relentless Preamplifier.
Coaxial: Press this to use the SPDIF coaxial digital input on the back of the Relentless Preamplifier.
USB: Computers can be connected using a USB-A male-to-USB-B male cable. The USB-A connector
is connected to the computer's USB jack and the USB-B connector is plugged into the USB input.
The USB input is selected by pressing the USB input selector button on the app. Operation is
automatic when connecting Apple computers running macOS to the digital module. When using
a computer running Windows OS, bridging software and Windows driver software will need to
be installed. A simple solution when using a Windows PC is to install the Roon Labs music player
software (subscription required) and the digital module's Windows driver. JRiver software is also
a good option when using Windows PC. Please visit the Relentless Preamplifier product page at
www.dandagostino.com for additional information on connecting a Windows PC to the Relentless
Preamplifier and to download the required Windows driver.
1 5