DAN DRYER 3000 유지보수 및 서비스 매뉴얼 - 페이지 11

{카테고리_이름} DAN DRYER 3000에 대한 유지보수 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAN DRYER 3000 13 페이지. Hand dryer

Reference

Version

3000-ENG

08.01.2018

Heating element replacement

Warning !!!

During cleaning and service the hand dryer

must always be disconnected from the power

supply

1. Disconnect power supply.

2. Disassemble cover by removing the two cover

screws at the bottom of the housing. Use the

special Allen key which was originally supplied

with the hand dryer.

3. Disconnect wires from timer unit.

4. Disassemble sensor bracket and

timer unit from fan housing.

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]

Document

3000 DAN DRYER Hand dryer.

Maintenance and service manual

5. Loosen the two screws and dismount fan housing

6. Loosen the screws and disassemble air outlet

7. Disassemble heating element from air outlet.

8. Assemble new heating element and reassemble

9. Reassemble all components and test run

Lang.

from base plate.

from fan housing.

all other components.

the hand dryer.

Page

11 of 12