Concept Perugini CS 135 지침서 - 페이지 5
{카테고리_이름} Concept Perugini CS 135에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Concept Perugini CS 135 18 페이지. Verge flail mowers
Identification
The identification plate, attached to the machine shows the following information:
These data are very important in order to check the compatibility between the
machine and the tractor and when ordering spare parts
Before operation
At the factory each machine is carefully inspected to guarantee proper
functioning. In addition, the dealer, before delivering the machine should have
carried out a pre delivery inspection. However as a precaution measure check:
•
Oil level in the gearbox
•
Grease all those components provided with grease nipples
•
Air pressure in the tractor's tyres, length of lift arms
•
Tractor PTO speed to match the machine transmission speed
Safety
Symbols
In this booklet three different symbols are used to highlight danger levels or
important information
DANGER
To draw the operator's attention to situations which could
endanger his or other people safety.
CAUTION
o draw the operator's attention to situations which could affect
T
the machine performances but not his or other people safety.
IMPORTANT
To draw the operator's attention to situations which do not affect
the machine performances and his or other people safety.
It is important to comply with the instructions given by the safety stickers, which
must always be on the machine. If new ones are required, contact your dealer.
•
Manufacturer's Name
•
CE mark
•
Year of production
•
Serial number
•
Recommended tractor horsepower
•
Overall weight
•
P.T.O. speed and direction of
rotation
5