Concept Perugini CT 135 지침서 - 페이지 12

{카테고리_이름} Concept Perugini CT 135에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Concept Perugini CT 135 15 페이지. Flail mowers

CT Belt Adjustment

B
To adjust the belt tension tighten or slacken the bolt A until the desired
tension has been made
Undo counter bolts B and raise or lower the gearbox in order to make the
side shaft square with the side of the mower
If the gearbox has been raised or lowered by quite a difference then the side
shaft guard will need to be moved and made square. To do this slacken bolts
C and move the guard up or down and then tighten C

XT YT Belt Adjustment

B
D
A
C
12
C
Slacken bolts D which are situated inside the
side shaft guard
Adjust bolt B as desired in order to obtain the
correct tension
Via bolts A move the gearbox so that the side
shaft is parallel to the ground and then tighten A
Slacken C in order to manoeuvre the side shaft
guard so that this too is parallel with the ground,
then tighten D and C
A
B