ADDER AdderLink X50 USB 사용자 설명서 - 페이지 11
{카테고리_이름} ADDER AdderLink X50 USB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDER AdderLink X50 USB 18 페이지.
페이지 인쇄
Dual user configuration
You can combine two Adder X50 extender sets to create a dual
user configuration. Such an installation would allow a single
computer to be controlled from two different positions, with each
position receiving the same audio visual output and having equal
and concurrent control over the computer. Arbitration between the
two positions is handled by the computer's USB system and so this
arrangement is better suited to situations where two users would
not often require simultaneous access.
REMOTE
ADDER
®
PC
REMOTE
VIDEO
AUDIO
USB
ADDER
®
REMOTE
ADDER
®
Both local modules
require their own
USB links to the PC
REMOTE
ADDER
®
USER
1
POWER
SHARPNESS
LINK
TO LOCAL
ON
CATx link (up to 50m)
POWER
SHARPNESS
LINK
TO LOCAL
ON
Video and audio crosslinks are
made from first local module to
the second local module
POWER
SHARPNESS
LINK
TO LOCAL
ON
CATx link (up to 50m)
USER
2
POWER
SHARPNESS
LINK
TO LOCAL
ON
First local module
Audio, USB and
video from the PC
Audio crosslink
from first to
second local
module
Second USB
from the PC
Most of the connections are similar to the standard configuration. The main
difference is in the links to the second local module. Use an audio link lead to
connect the audio out socket of the first local module to the audio in socket of
the second. Similarly, use a video link lead to connect the video out and video
in ports. The second local module then requires its own USB link directly to the
computer. In all other respects follow the standard instructions to connect CATx
links and all of the remote module connections.
Video crosslink
from first to
second local
module
10