Concept Pro AIR3526-IP2M 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Concept Pro AIR3526-IP2M에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Concept Pro AIR3526-IP2M 8 페이지. Ip external medium bullet camera

4. Finding the Camera IP Address

Using the IPSearch Windows Software

IPSearch can be found by scanning the QR code on the front of this quick start

guide. Download IPSearch from the website linked to the QR code, install, and

launch the program.

When IPSearch loads, press Start to scan

the network for any connected IP cameras.

Located cameras can be sorted by IP address,

model name, or firmware version.

Use the listed IP address to access the camera

via Internet Explorer.

When prompted, install the ActiveX controls for

the best remote web viewing experience. The

default user name is admin and the default

password is admin.

Note: After first logging in to the IP camera,

you will be prompted to change the default

password to a secure password. This is highly

recommended for all users to ensure proper

device security.

Using the Concept Pro Test Monitor (VLEDTM-TS7)

Turn on the VLEDTM-TS7 test monitor and enter

the IP Camera menu, then select ONVIF.

ONVIF will open and automatically scan the

connected network for ONVIF devices.

The test monitor can connect via WiFi or wired

LAN connection to the same network

as the IP camera.

Using Bonjour® on Mac OSX®

1. Open the Safari® web browser on the Mac

and click the Bookmarks button.

2. Select Bonjour. The camera IP address will

appear in the Bonjour Devices list.

3. Double-click the camera to open in Safari.

IP CAMERA QUICK START GUIDE