3onedata IES3020-4GS-2F-P 사용자 설명서 - 페이지 4
{카테고리_이름} 3onedata IES3020-4GS-2F-P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3onedata IES3020-4GS-2F-P 4 페이지. Ies3020-4gs series industrial ethernet switch
페이지 인쇄
outlet holes. Cables should be banded and fixed when
they are out of the groove;
7. User cable should be separated from the power lines.
Cables, power lines and grounding lines cannot be
overlapped and mixed when they are in the same groove
road. When cable is too long, it cannot hold down other
cable, but structure in the middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving
causes terrible loss of link). Its banding should be
moderate, not too tight, and should be separated from
other cables;
9. It should have corresponding simple signal at both sides
of the cable for maintaining.
【Specification】
Technology
Standard: Support IEEE802.3, IEEE802.3u, IEEE802.3z
Flow control: IEEE802.3x flow control, back press flow
control
Exchange attribute
100M forward speed: 148810pps
1000M forward speed: 1488100pps
Transmit mode: store and forward
System exchange bandwidth: 12.8G
MAC address table: 8K
Memory: 4M
Interface
Electric port: 10Base-T/100Base-TX/1000Base-TX auto
speed control, Half/full duplex and MDI/MDI-X auto
detect
100M optic fiber port: 100Base-FX, SC/ST/FC connector
Gigabit SFP port: 1000Base-FX, SFP slot
Transfer distance
Twisted cable: 100M (standard CAT5/CAT5e cable)
Multi-mode: 1310nm, 2Km
Single-mode: 1310nm, 20/40/60Km
1550nm, 80/100/120Km
Power supply
Input voltage: 12～48VDC
Type of input: 4 bit 7.62mm pitch terminal block
Overload Current Protection: 4.0A
Consumption
IES3020-4GS-P (12~48VDC):
Unload consumption: 4.78W@24VDC
Full load consumption: 9.86W@24VDC
IES3020-4GS-2F-P (12~48VDC):
Unload consumption: 5.86W@24VDC
Full load consumption: 10.63W@24VDC
IES3020-4GS-4F-P (12~48VDC):
Unload consumption: 7.2W@24VDC
Full load consumption: 11.83W@24VDC
Working environment
Working temperature: -40～75℃
Storage temperature: -40～85℃
Relative Humidity: 5%~95% (no condensation)
Mechanical Structure
Shell: IP40 protect grade, metal shell
Installation: DIN-Rail mounting
Size (W×H×D): 160mm×70mm×130mm
Weight: 1.1kg
Industry Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN 61000-4-2 (ESD), Level 4
EN 61000-4-3 (RS), Level 3
EN 61000-4-4 (EFT), Level 4
EN 61000-4-5 (Surge), Level 4
EN 61000-4-6 (CS), Level 3
EN 61000-4-8, Level 5
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS, UL508 (Pending)
Warranty: 5 years
- 4 -