Abt W10752684 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} Abt W10752684에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abt W10752684 20 페이지. 27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven flush installation kit
페이지 인쇄3. In the same manner, remove and replace the plastic spacer
on the left side of the oven.
New plastic spacer
Replace Plastic Spacers on Double Ovens
1. Remove the 2 screws, 1 in each spacer, attaching the 2
plastic spacers (A) to the right side of the oven.
2. Using the 2 screws removed, install 2 new plastic spacers
(B) provided with this kit.
A
B
A
A. Plastic spacer
B. New plastic spacer
3. In the same manner, remove and replace the 2 plastic
spacers on the left side of the oven.
8
Install Oven
1. Using 2 or more people, lift the oven partially into the cabinet
cutout. Use the oven opening as an area to grip.
NOTE: When pushing the oven into the cabinet, open the
oven door and push against the seal area on the front frame.
Do not push against the outside edges.
2. Push against the front frame of the oven to push oven into
cabinet. Push oven completely into cabinet and center in
cabinet cutout.
3. Push the oven completely into the cabinet, and center the
oven into the cabinet cutout.
4. Remove the tape from the black front trim piece.
Securely fasten the oven to the cabinet using the #8-14 x
■
/
" (1.9 cm)screws provided.
3
4
Insert the screws through the hole in the black trim piece,
■
aligning with the hole in the oven frame. Do not
overtighten the screws.
A
B
C
A. Oven frame
B. Oven frame hole
C. Black trim piece