Elite PLATINUM EG-6203 사용 설명서 - 페이지 7
{카테고리_이름} Elite PLATINUM EG-6203에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elite PLATINUM EG-6203 20 페이지. 80qt. xl heavy duty electric skillet
페이지 인쇄
- 1. Table of Contents
- 2. Important Safeguards
- 3. Short Cord Purpose/Polarized Plug
- 4. Installation Guide
- 5. Parts Identification
- 6. Temperature Control Probe
- 7. How to Use Your Skillet
- 8. Operating Instructions
- 9. Hints & Tips
- 10. Cooking Times & Temperatures
- 11. Cleaning & Maintenance
- 12. Troubleshooting
- 13. Recipes
- 14. Warranty & Return Instructions
TEMPERATURE CONTROL PROBE
1.
Trigger release for easy removal.
2.
Temperature selector
3.
Built-in thermostat
NOTE: The light on the control probe will illuminate and will remain on until the set
temperature is reached. It will then cycle on and off throughout cooking, as the
temperature is maintained by the thermostat. On initial heating of the skillet, it is
recommended that the temperature be allowed to cycle (the light cycling on and off)
several times. This will help the cooking surface to adjust to a more accurate cooking
temperature.
TRIGGER RELEASE CONTROL PROBE
The probe is thermostatically controlled and incorporates an indicator light which
switches off automatically when the temperature selected has been reached and then
cycles on and off to indicate that the selected temperature is being maintained.
HOW TO USE YOUR ELECTRIC SKILLET
1.
Before first use, the skillet must be cleaned. Ensure the temperature control probe is
not attached to the skillet during the cleaning process. Wash your skillet and lid with
hot water and mild detergent. Rinse with fresh water and dry thoroughly. Your
skillet is now ready for use.
2.
Season the cooking surface by applying a thin coat of cooking oil and rub in with a
paper towel.
3.
Insert the control probe into the inlet on the side of the skillet.
4.
Plug the power cord into the power outlet and turn on.
5.
Set the temperature control probe to the desired temperature setting.
WARNING: Do not place extremely cold / frozen foods or liquids into a hot skillet as it
may result in excessive steam, spitting and spattering causing personal injury.
NOTE: Upon the initial use, the skillet may give off a light smoke and a slight burning
odor. This is due to the protective coating applied to the non-stick surface during
manufacturing. It is harmless and will subside with subsequent use.
Questions? We're here to help! Visit: www.maxi-matic.com for support on this product.
6