AirTV 2 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} AirTV 2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTV 2 2 페이지.

페이지 인쇄

Before you start...

Place your HD antenna in the best location for receiving

the most and strongest local signals. You don't need to

permanently mount your antenna just yet, as you may

need to adjust it later for optimal performance.

You can get the best reception from your antenna by following these tips:

Try a window first

Higher is better

Point it toward your broadcast towers

For more tips and information on the ideal placement for your type of

antenna, visit AirTV.net/OTA.

Connect your AirTV 2

Connect to antenna

Connect an HD antenna to

your AirTV 2 using a

coaxial cable.

Connect to Internet

Connect your own Ethernet

cable from your router or

modem. For WiFi, you will

connect your AirTV 2 to

your network by using the

Sling app on your mobile

device in the next step.

Connect to power

Connect the power cable

and the Power light on the

front of the unit will blink.

Other lights may blink as

well, which is normal.

Need to start over?

If you need to restart the installation process while configuring your AirTV,

push the end of a paper clip into the RESET port for 12 seconds (until the

front panel lights blink twice) to factory-reset the unit.

Configure your AirTV 2

Complete setup using the Sling app, which

integrates all of your live TV channels, including

Sling and your HD local channels.

1. On your mobile device, connect to your home

WiFi network that AirTV will connect to.

2. Open the Sling app and sign in. If you don't have the app,

download and install it from your app store, then create your free

Sling account at Sling.com/AirTV.

3. In the Sling app, access Sling TV Settings » Over-the-Air Channels.

4. Follow the on-screen instructions to connect to your home WiFi

network and scan for channels.

If you don't see some of your available local channels

after the channel scan completes, make sure that your

antenna is placed in the best location, then rescan for

channels. You can find tips for improving your signal at

AirTV.net/OTA.

5. Once your setup is complete, you can access your local channels on

your iOS, Android, Fire TV and Roku devices via the Sling app. Visit

AirTV.net to see a complete list of devices compatible with AirTV 2.

Note: AirTV 2 supports up to 2 simultaneous streams, only 1 of which can be outside the

home where AirTV is located.

Using the DVR feature (optional)

Connect a hard drive to the AirTV 2

USB port and follow the

on-screen steps in the Sling app.

Start recording your local

channels. If you need help visit

AirTV.net/Help.

Important Product Information

FCC Compliance Information

Model: AirTV 2

This device must be installed at least 20cm (~8 inches) from typical

person locations per FCC RF exposure guidelines.

Do not make any modifications to this device, doing so may void your

authority to operate it.

NOTE: This device has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the device and receiver.

– Connect the device into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

If using an outdoor antenna follow NEC guidelines included with the

antenna for grounding of the coaxial cable.

Responsible Party US Contact Information:

Dish Technologies LLC

9601 Meridian Blvd

Englewood, CO 80112

www.dish.com

Warranty, safety, regulatory, and legal information can be found at

AirTV.net/Legal.

mentioned are the trademarks of their respective owners and not of

AirTV L.L.C.

WARNING

Cancer and Reproductive Harm