Elite Acoustics M2-6 사용자 설명서 - 페이지 7

{카테고리_이름} Elite Acoustics M2-6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elite Acoustics M2-6 13 페이지. Live-performance studio monitor with 4 channels, mixer, effects, and bluetooth

페이지 인쇄

Simply put, the annoying shrilling howl of growing and untamed feedback is the result of "in-

phase" frequencies getting together and being reinforced by the sound system and environ-

ment.

Phase Switch – since the purpose of the Phase Switch is to reverse the polarity, the first line

of defense is to change the phase, which can sometimes be a cure all by itself. This has the

effect of changing the phase relationship between the amplified signal and live sound, which

can break up some "in-phase" reinforcing components. On the other hand, it's preferred if we

can leave the phase set to provide the most natural and balanced sound.

Notch Filter – Another way to prevent "in-phase" reinforcement is to simply find and "notch"

out the offending frequency. The approach is straight forward; with the Notch set to full "cut"

(counter clockwise), slowly rotate the Notch Frequency to align with and cancel the offensive

tone.

Phase and Notch – probably the most widely used approach is to start without the notch

filter engaged, and to bring up the gain and or volume to encourage feedback. Changing the

Phase will change the frequency of the feedback. Leave the Phase set to whichever setting

produces the higher pitched note.

Next, use the aforementioned Notch technique to hone in on and prevent the feedback. Keep

in mind, fighting feedback in this manner may or may not appeal to your taste in overall tone.

It's certainly fair to experiment and try it the other way around, i.e., Phase switch to stop HF

tone and Notch to cutout the LF tone. After all, Live Sound is an Art and when it's all said and

done tone is King.

To fully charge a unit –

a. Set Battery Switch to "CONNECT"

b. Turn Power Switch OFF

c. Connect "AC" adaptor to Power Jack.

d. Blue "Charge" LED should be lit, Charge time can vary from 24 – 36 hours

depending on model.

When unit is powered with "AC" adaptor, Battery Switch should be in "CONNECT"

position.

Battery Switch should be on "DISCONNECT" when unit is packed for transit or unit

is in storage. Make sure battery is fully charged before UNIT is put into storage. We

recommend fully charging the battery at least once each month.

SLA battery lifetime is typically 1 – 2 years depending on usage.

Battery

Level

•

Low

•

Charge

HOW TO DEAL WITH ACOUSTIC FEEDBACK

EAE BATTERY & RECHARGING INFORMATION

FOR MAXIMUM BATTERY LIFE

Recharge after every use

Use & recharge battery at least once a month

DO NOT leave power switch in the "ON" position when it is not in

use. Doing so after a long period of time will damage the battery

Keep unit in a cool, dry place away from extreme

temperatures

Do not service, modify, or replace the battery

If the battery fails to charge, contact Elite Acoustics Designs