Elite Acoustics Engineering A4-58 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Elite Acoustics Engineering A4-58에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Elite Acoustics Engineering A4-58 13 페이지. 120w lithium battery powered acoustic amplfier with 4 channels, mixer, effects, and bluetooth
페이지 인쇄
1.
To fully charge a unit –
a. Set Battery Switch to "CONNECT"
b. Turn Power Switch OFF
c. Connect "AC" adaptor to Power Jack.
d. Blue "Charge" LED should be lit, Charge time is about 5-6 hours.
2.
When unit is powered with "AC" adaptor, Battery Switch should be in "CONNECT" position.
If unit is always plugged in, it is recommendate to put Battery Swtich in Disconnected
position, but make sure to recharge unit monthly.
3.
Battery Switch should be on "DISCONNECT" when unit is packed for transit or unit is in storage.
Make sure battery is fully charged before UNIT is put into storage. We recommend fully charging
the battery at least once each month.
4.
Lithium Iron Phosphate (LifePO4) battery lifetime is typically 3 – 4 years depending on usage.
5.
Recharge Battery every month if not in use.
•
Battery TYPE - LifePO4
•
Battery METER indicators -
•
•
FULLY CHARGED. - GREEN LED ON (will turn off once unit is in use)
•
NORMAL - GREEN ON
•
NORMAL and LOW -- Both LEDS are ON less then (about 10% - 25%)
•
LOW - RED ON (less then 10%)
•
CHARGING - BLUE LED ON. (will turn off when Fully Charged)
•
•
For Maximum Battery Life
•
- Recharge when battery is low.
•
- Drain & recharge battery at least once a month
•
- Do not leave power switch in the "ON" position when it is not in use.
•
- Keep unit in a cool, dry place away from extreme temperatures
•
- Do not service, modify, or replace the battery
•
- If the battery fails to charge, contact Elite Acoustics
•
•
If unit is always plugged in, it is recommendate to put Battery Swtich in Disconnect-
ed position, but make sure to recharge unit monthly.
EAE BATTERY & RECHARGING INFORMATION
Charged
Battery Level
Low
Charging
FOR MAXIMUM BATTERY LIFE
Charged
Low
Charging