Anybus X-gateway 사용자 설명서 - 페이지 10
{카테고리_이름} Anybus X-gateway에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anybus X-gateway 20 페이지. Profibus master interface
Anybus X-gateway에 대해서도 마찬가지입니다: 설치 시트 (2 페이지), 네트워크 매뉴얼 (14 페이지), 네트워크 매뉴얼 (16 페이지)
페이지 인쇄Description
2.3.2
Live List (Master Configurations Only)
The Live List provides the active status of the slaves associated with an on-board network inter-
face acting as master. The list is assembled by the master interface and forwarded to the other
network each gateway cycle.
The Live List functionality is disabled by default and must be enabled for the master interface
through Anybus Configuration Manager.
Offset
bit 0
0
Slave 0
1
Slave 8
2
Slave 16
3
Slave 24
4
Slave 32
5
Slave 40
6
Slave 48
7
Slave 56
Bit set (1) = Slave active
Bit cleared (0) = Slave not active
The exact definition of each set or cleared bit depends on the network interface used. See the
Network Guide for the respective interface for more information.
2.3.3
Network-specific Status
Some network interfaces may provide additional registers or status lists. See the Network
Guide for the respective interface for more information.
®
Anybus
X-gateway
™
User Manual
bit 1
bit 2
bit 3
Slave 1
Slave 2
Slave 3
Slave 9
Slave 10
Slave 11
Slave 17
Slave 18
Slave 19
Slave 25
Slave 26
Slave 27
Slave 33
Slave 34
Slave 35
Slave 41
Slave 42
Slave 43
Slave 49
Slave 50
Slave 51
Slave 57
Slave 58
Slave 59
bit 4
bit 5
bit 6
Slave 4
Slave 5
Slave 6
Slave 12
Slave 13
Slave 14
Slave 20
Slave 21
Slave 22
Slave 28
Slave 29
Slave 30
Slave 36
Slave 37
Slave 38
Slave 44
Slave 45
Slave 46
Slave 52
Slave 53
Slave 54
Slave 60
Slave 61
Slave 62
8 (18)
bit 7
Slave 7
Slave 15
Slave 23
Slave 31
Slave 39
Slave 47
Slave 55
Slave 63
HMSI-27-262 3.0