Anybus Wireless Bridge II 설치 매뉴얼 - 페이지 9

{카테고리_이름} Anybus Wireless Bridge II에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anybus Wireless Bridge II 17 페이지.

Configuration

Anybus Wireless Bridge II can be configured via the web interface or using one

of the pre-configured Easy Config modes.

Advanced configuration can be carried out by issuing AT (modem) commands

through the web interface or over a Telnet or RAW TCP connection to port 8080.

A list the of supported AT commands is included in the web interface.

4.1

The Web Interface

The web interface is accessed by pointing your web browser to the IP address of

the Wireless Bridge. The default address is 192.168.0.99.

Most configuration settings are self-explanatory. See also the built-in help and

the Anybus Wireless Bridge II User Manual.

Anybus

Wireless Bridge II

The web interface is designed for the current stable versions of Internet

Explorer, Chrome, Firefox and Safari. Other browser versions may not

support all functions of the interface.

™

Installation Guide

9 (16)

SCM-1202-013/SP2167 1.1