AnyCubic Kobra 사용자 설명서 - 페이지 7

{카테고리_이름} AnyCubic Kobra에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyCubic Kobra 13 페이지.
AnyCubic Kobra에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지)

Be cautious during assembly as some parts may have sharp edges.

It is suggested to use a flat desktop and place the parts in an orderly manner

for quick assembly.

The color of some parts may be different from what in the manual, but the

assembly is the same.

Firmware has been pre-uploaded to the motherboard. After completing the

assembly, please level the platform and load the filament then you could

start the first test print.

Note: Every unit of the printer has been inspected and tested for printing.

Therefore, in some cases, there might be very small marks left on the print head

or on the heated bed. Those will not affect the printing quality and those mean

the printer has been tested for the quality. If there are some tiny scratches on the

aluminum beams or slight unevenness on the platform, it is normal and won't

affect the printing quality. Thank you very much for your kind understanding.

Team ANYCUBIC

Installation