AnyDATA APT-210D 사용자 설명서 - 페이지 14
{카테고리_이름} AnyDATA APT-210D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyDATA APT-210D 18 페이지. Cdma personal gps locator
7 O
F
PTIONAL
EATURE
NOTE: This feature is enabled/disabled by the application provider and may
not be supported by the device you have purchased.
7.1 G
F
(O
EO
ENCE
PTIONAL
Set GEO Fence On:
1. Press and hold the SET button for approx 3 seconds.
2. The GEO Fence LED will blink continuously while it sets the origin.
3. If the origin is set, the LED will stay ON, if it fails, the led will
turn OFF.
Set Geo Fence Off:
1. Press and hold the SET button for approx 3 seconds.
2. The GEO Fence LED will stay turned OFF when the GEO Fence is off.
NOTE: The Radius and Interval will be set to the current setting. If no
Radius or Interval has been set, this will be set to the default values.
Radius = 100M, Interval = 5 Minutes. The Origin will be set to the current
location of the device. Please note the Origin can take up to 10 minutes to
set depending in the environment the device is currently in.
All Rights Reserved.
Personal GPS Locator Users Manual (APT-210D)
)
14/17