ducduc OSLO 조립 지침 매뉴얼 - 페이지 10

{카테고리_이름} ducduc OSLO에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ducduc OSLO 11 페이지.
ducduc OSLO에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)

operation

The mattress height should be lowered as your baby grows to ensure that he/she does

not climb out of the CRIB. When child is able to pull to standing position, set mattress to

lowest position and remove bumper pads, large toys and other objects that could serve as

steps for climbing out. Regularly assess your baby's abilities and make adjustments

accordingly.

To adjust the height of the mattress support, remove the mattress from the crib.

Unscrew all four MATTRESS SUPPORT BOLTS

, remove all LOCKING WASHERS

and REGULAR WASHERS

and remove MATTRESS SUPPORT PANEL

. Remove

and reinsert the smooth ends of each MATTRESS SUPPORT PIN

in mattress support

holes on SIDE RAILS

at desired height. Refer to steps 9 through 11 for reinserting

MATTRESS SUPPORT PANEL

and reattaching REGULAR WASHERS

, LOCKING

WASHERS

, and MATTRESS SUPPORT BOLTS

Periodically check to make sure every component is properly and securely in place and all

bolts and fasteners are tight.

Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with

mild soap on a soft rag. Rinse and dry thoroughly. If you ever re-finish this furniture, be

sure to use only a non-toxic finish specified for children's furniture.

Store crib in a dry area.