ducduc OSLO 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} ducduc OSLO에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ducduc OSLO 11 페이지.
ducduc OSLO에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)
페이지 인쇄5
5
5
5
5
5
5
5
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people.
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
Carefully stand crib upright. This requires two people. One person holds onto crib to prevent it from
tipping over during assembly step 6.
tipping over during assembly step 6.
tipping over during assembly step 6.
One person holds onto crib to prevent it from tipping over during
tipping over during assembly step 6.
tipping over during assembly step 6.
tipping over during assembly step 6.
tipping over during assembly step 6.
assembly step 6.
6
Line up other SIDE RAIL
6
6
align with the rail-connector-holes on the END PANELS
6
6
6
6
6
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
Line up remaining SIDE RAIL
END RAILS . Attach LOCKING WASHERS
Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
END RAILS . Attach LOCKING WASHERS
BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
to RAIL CONNECTOR BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
WRENCH
the four RAIL CONNECTOR BOLTS
WRENCH
WRENCH
WRENCH
WRENCH
WRENCH
WRENCH
ALLEN WRENCH
1
1
1
1
1
1
1
1
so its rail-connector-holes
A
so its rail connector holes align with the rail connector holes on the
so its rail connector holes align with the rail connector holes on the
so its rail-connector-holes align with the rail-connector-holes on the
so its rail connector holes align with the rail connector holes on the
so its rail connector holes align with the rail connector holes on the
so its rail connector holes align with the rail connector holes on the
so its rail connector holes align with the rail connector holes on the
K.2
and REGULAR WASHERS
F
and insert and tighten
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
and insert and slightly tighten the four RAIL CONNECTOR BOLTS
as in steps 3 and 4. Do not tighten all the way.
with
F
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4. Do not tighten all the way.
as in steps 3 and 4.
G
2
2
2
2
2
2
2
2
.
B
and REGULAR WASHERS
L.2
and REGULAR WASHERS
and REGULAR WASHERS
and REGULAR WASHERS
and REGULAR WASHERS
and REGULAR WASHERS
and REGULAR WASHERS
A
3
3
3
3
3
3
3
3
to RAIL CONNECTOR
to RAIL CONNECTOR
to RAIL CONNECTOR
to RAIL CONNECTOR
to RAIL CONNECTOR
to RAIL CONNECTOR
to RAIL CONNECTOR
with ALLEN
with ALLEN
with ALLEN
with ALLEN
with ALLEN
with ALLEN
with ALLEN
F
L.2
K.2
Do not tighten all the way.
Do not tighten all the way.