ADDER AdderLink X100 사용자 설명서 - 페이지 17

{카테고리_이름} ADDER AdderLink X100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDER AdderLink X100 19 페이지. Extender set
ADDER AdderLink X100에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

페이지 인쇄

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in

workmanship and materials for a period of two years from the date of original

purchase. If the product should fail to operate correctly in normal use during the

warranty period, Adder will replace or repair it free of charge. No liability can be

accepted for damage due to misuse or circumstances outside Adder's control.

Also Adder will not be responsible for any loss, damage or injury arising directly

or indirectly from the use of this product. Adder's total liability under the terms

of this warranty shall in all circumstances be limited to the replacement value of

this product.

If any difficulty is experienced in the installation or use of this product that you

are unable to resolve, please contact your supplier.

Safety information

• For use in dry, oil free indoor environments only.

• do not use to link between buildings.

• Ensure that all twisted pair interconnect cables are installed in compliance

with all applicable wiring regulations.

• do not connect CATx link interfaces (RJ45 style connectors) to any other

equipment, particularly network or telecommunications equipment.

• Warning – the power adapter contains live parts.

• No user serviceable parts are contained within the power adapter - do not

dismantle.

• Plug the power adapter into a socket outlet close to the X100 module that it

is powering.

• Replace the power adapter with a manufacturer approved type only.

• do not use the power adapter if the power adapter case becomes damaged,

cracked or broken or if you suspect that it is not operating properly.

• If you use a power extension cord with the X100 module, make sure the

total ampere rating of the devices plugged into the extension cord do not

exceed the cord's ampere rating. Also, make sure that the total ampere

rating of all the devices plugged into the wall outlet does not exceed the

wall outlet's ampere rating.

• do not attempt to service the modules yourself.

• The X100 module and power supply can get warm in operation – do not

situate them in an enclosed space without any ventilation.

• The X100 module does not provide ground isolation and should not be used

for any applications that require ground isolation or galvanic isolation.