ADDER AdderLink X100 사용자 설명서 - 페이지 7
{카테고리_이름} ADDER AdderLink X100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDER AdderLink X100 19 페이지. Extender set
ADDER AdderLink X100에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)
페이지 인쇄
X100 module switches
Certain aspects of operation can be affected by the switches on the X100
receiver.
OFF: Normal operation
ON: Flash upgrade
Determines configuration
of hotkeys in conjunction
with switch
Note: When shipped, all switches are set in the OFF positions and this will
produce normal operation.
Determines configuration
Switch
of hotkeys in conjunction
OFF: Normal operation.
with switch
ON: (Before power is applied) Places the X100 receiver into flash upgrade
Reserved for
mode so that the internal software can be changed. Please see the
future use
upgrade
Switches and
Switches 2 and 3 determine which two keyboard keys (when pressed in unison)
are to be designated as 'hotkeys'. Hotkeys signal to the X100 receiver that the
next key to be pressed is a special configuration command for the module and is
not to be passed to the computer system.
2 OFF
3 OFF
2 OFF
3 ON
2 ON
3 OFF
2 ON
3 ON
Switch
This switch is reserved for future use.
section in the 'Special configuration' chapter.
Hotkeys = CTRL and SHIFT
Hotkeys = ALT and SHIFT
Hotkeys = CTRL and ALT
Hotkeys disabled
Flash.
6