Conceptronic CM3PVR 방법 - 페이지 3

{카테고리_이름} Conceptronic CM3PVR에 대한 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Conceptronic CM3PVR 4 페이지. Dvd playback & avi
Conceptronic CM3PVR에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 지침 (3 페이지), 펌웨어 업그레이드 지침 (10 페이지)

페이지 인쇄

Step 4: Recording from the digital TV tuner

When all cable connections have been made turn on your CM3PVR and digital TV tuner. The menu of the

CM3PVR will be shown on your TV. If this is not the case, refer to the seventh chapter ("First-Time

Configuration") of the CM3PVR manual.

Note:

Make sure your digital TV tuner is properly configured i.e. digital channels are installed.

Otherwise make sure that is done first, before continuing with the steps below.

There are two methods to record from a digital TV tuner. The first one is to start recording instantly and the

second one is to schedule a recording.

Instant recording (One Touch Record)

1. Press button '4' on the remote control of the CM3PVR or select the 'AV input' icon from the CM3PVR

menu. When the digital TV tuner is on, you will see the video from your digital TV tuner on your TV.

2. Use the remote control from your digital TV tuner to select the (digital) channel from which you

want to start recording.

3. Press the red 'RECORD' button on the remote control of the CM3PVR to start recording instantly.

4. To stop recording, press the 'STOP' button on the remote control of the CM3PVR.

Note:

Do not turn off the CM3PVR or the digital TV tuner during the recording. Also do not press

any buttons on either of the remote controls or devices itself. Doing so might result in an

incomplete recording.

www.conceptronic.net

Page 3 of 4