Anyload ES-600HA 제품 설명서 - 페이지 8

{카테고리_이름} Anyload ES-600HA에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload ES-600HA 9 페이지. Precision balance

5.9.4 Demonstrating communication software

(1)The super end under WIN9X/NT/2000/XP

(2)The debugging assistant on gjwtech.com

(3)Self-arranging communication software

To keep the balance operating properly, the housing and platform should be

kept clean and free from foreign material. If necessary, a cloth dampened with

a mild detergent may be used. Keep calibration masses in a safe dry place.

Unplug the AC Adapter when not in use. For long term storage, remove the

batteries.

The following list describes the various errors which may appear on the display

and the suggested remedy:

Err 0 With the platform on, this signal indicates the platform is too light. Make it

heavier properly. If this error still occurs, the sensor or the circuit board may be

destroyed. The balance must be sent to the manufacturer to be serviced.

Err 1 The sample being weighed exceeds the capacity of the balance. If the error

occurs when the sample is within the balance capacity, maybe the balance is

not correctly calibrated.

7 |

ANYLOAD ES-HA Series Precision Balance Product Manual (V1611)