Duco DucoBox Silent 325 설치 매뉴얼 - 페이지 8
{카테고리_이름} Duco DucoBox Silent 325에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duco DucoBox Silent 325 16 페이지.
Duco DucoBox Silent 325에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)
페이지 인쇄
ENGLISH
06.C LED indications
06.D Setting type of home
Setting the type of home and number of occupants correctly will provide the ventilation system with a better basis to adjust the
mid-position� There are two types of home: low-rise (e�g� a house) and high-rise (e�g� a flat)� Configuration of this component is
obligatory in the Netherlands. The standard setting for a DucoBox is as a low-rise home for 4 (or more) occupants�
Setting type of home
Ensure that 'Installer Mode' has been activated (via the 'INST' button)�
1
Press 'LOW' for a low-rise or 'HIGH' for a high-rise home�
2
The yellow LED (see illustration) will flash in a pattern that indicates the
number of occupants: Once, twice (applies for 3 occupants as well) or 4
3
times (applies for 4 occupants or more)� Press 'LOW' or 'HIGH' respectively
again until the LED pattern matches the correct number of occupants�
Press the 'INST' button to exit 'Installer mode'�
4
8
L2000641 Installation guide for DucoBox Silent (Revision G | 17.07.2019)
RED (blinking slowly)
Not in network
GREEN (blinking slowly)
In network
YELLOW (clignotement rapide)
Transitional phase (please wait)
Component is displayed if changes are being put through via the master�
The system is not working correctly because the DucoBox has not been calibrated� Restart the
DucoBox� Follow the guidelines in '10 essential tips' if the problem recurs continually�
In network, waiting for associated components
YELLOW (on) Initialising (system
WHITE or OFF
Normal
BLUE
ORANGE
RED (blinking rapidly)
Logging in
GREEN (blinking rapidly)
configuration in progress)
HIGH
or
LOW
INST