Anyload S2 사용자 설명서 - 페이지 3
{카테고리_이름} Anyload S2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload S2 15 페이지.
페이지 인쇄
About This Manual
This manual is intended for use by service technicians responsible for
installing and servicing 110ES-WL wireless scale and S2 weighing
indicator.
CAUTION
1. Don't make lifts beyond rated
capacity of the scale
2. The scale must be checked for
operation routinely. Don't operate if
hook, shackle, sling, cable, etc show
any sign of defects or excessive
wear.
3. Avoid bump, keep the scale and
the indicator away from corrosive
liquid or environment.
4. If the scale is not going to be
operated for a long time, please turn
1. Introduction
110ES-WL02 consists of 110ES load cell, shackles, wireless communication
device on the load cell body, and S2 wireless portable weighing indicator. The
load cell body housed in an IP67-rated 316 stainless steel enclosure. The
indicator front panel consists of a LCD display, printer and keyboard, the
indicator comes up with a substantial and durable ABS indicator suitcase.
1.1 Standard Features
◆∑-Δ A/D conversion technology.
◆Keyboard calibration, simple
operation.
◆Weighing data save protection in
case of power off.
◆Battery charger with several
protection modes to extend life of
rechargeable battery.
◆Standard RS232 communication
interface (optional).
◆Portable design, packed in
portable box, easy to operate
outdoor.
Page 3 of 15 AL‐Manual‐110ES‐WL‐S2‐En‐103
off the scale and indicator,
recharging the battery every two
months to preserve the life-span of
the battery and recharge it before
operation
5. When indicator displays low
battery, recharge the battery first
before turn on the scale.
6. Most procedures described in this
manual are to be performed by
qualified service personnel only.
◆LCD display with dot character
with backlight
◆Gathering data records up to 2000
weighing, records can be classified,
searched and printed.
◆Standard parallel print interface
(EPSON printer).
◆Indicator with rechargeable
7.2V/2.8AH batter, scale body with
4*RCR123A batteries
◆ Power saving mode, indicator will
turn off automatically after 30minutes
without operation