Anyload S2 사용자 설명서 - 페이지 8
{카테고리_이름} Anyload S2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload S2 15 페이지.
페이지 인쇄
• 5.Stat List:
In Print Setting，press 5/AUTO to select this item, if there is a tick in the end,
the Stat List is enabled. When the indicator is in the counting mode, press
SAVE/PRINT, the printer will print the total weighing data instead of single
weighing data.
• 6.Print:
6.1. Separates, Lower limit, Scroll Set is suggested to be set to default
setting.
2.2 ZERO SETTING
In the setting mode, press 3/DATE to Enter Zero setting.
• 1.Power-on zero:
In Zero setting, press 1/CLEAR to
enter Power-on zero setting, when
the item is selected, there will be an
underline
under
means the number is now editable.
Press Search to switch the number,
user can choose one of these 5
numbers, to selects the range within
which the scale can be zeroed after
powering on the indicator.
2.3 Filter Setting
In the setting mode, press 5/DATE to Enter Filter setting.
Page 8 of 15 AL‐Manual‐110ES‐WL‐S2‐En‐103
the
number,
it
• 2.Manually ZERO：
In Zero setting, press 2/TIME to enter
Manually ZERO setting, when the
item is selected, there will be an
underline
under
means the number is now editable.
Press Search to switch the number,
user can choose one of these 5
numbers, to selects the range within
which the scale can be zeroed when
the indicator is manually operated in
the weighing mode.
the
number,
it