Anyload DD-KC1 운영 매뉴얼 - 페이지 8
{카테고리_이름} Anyload DD-KC1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload DD-KC1 13 페이지. Digital weight indicator
Anyload DD-KC1에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지)
페이지 인쇄
cancel the sampling, and the scale will adopt last sampling value to count ;
e. After you confirm the quantity of objects on the platform and the data displayed on
the LCD are the same, short press
count;
f. During the process of sampling and counting, the screen will display the sampling data
by rapidly flickering; keep the platform calm, stable, and without other interference
factors that would influence the weighing performance. If the weighing stays stable
for longer than 2s, the sampling and counting will be automatically finished. The
parameter will be saved automatically and the scale will return to counting mode; if
not, the screen will keep flickering the data and waiting for the stability of measuring.
4.10 Serial Port Printout
a．Connect the serial port with the scale according to the drawing below. Baud
Rate=9600，without parity digit, sent stop bit 1 (The serial connection diagram is
omitted）;
b. Open the serial communication software, for example, "HyperTerminal" in windows.
Select the connected portal number "COM" and set the baud rate as 9600bps, the
parity bit as "NONE", the data bit as "8Bit", and the stop bit as "1Bit".
c. You can select the serial output modes according to your own needs. The output
modes include 3 types: output by pressing
weight keeps stable, and continuous output. You can set though the "out" in
"Parameter setting".
6 |
A n y l o a d D D - K C 1 M a n u a l V ( 1 6 0 3 )
to confirm, and then begin to sample and
button, automatic output after the