Anytek T12+ 매뉴얼 - 페이지 6

{카테고리_이름} Anytek T12+에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anytek T12+ 18 페이지.

Function 1: Power ON/ Power OFF

Press the power button to turn the Dash Cam on. It will

automatically start recording once it receives power.

When power is turned off manually or power is removed,

the Dash Cam will save the current file and turn off.

Function 2: Background light ON/ OFF

When standby, short press the power button to enter

screen saver. Short press again to turn off the screen.

【NOTE】

A. Turn on/ff the screen will not influence the video

recording.

B. After short pressing the power button to turn off the

screen, touch the screen can wake up the screen.

◆Installation of Dash Cam

1. Turn off the vehicle engine

2. Insert the TF Card into the card slot

【NOTE】

A. Please use the high speed TF card( above class 6).

The capacity of the TF card should be no less than 4GB