3onedata NP302T Series 빠른 설치 매뉴얼 - 페이지 3
{카테고리_이름} 3onedata NP302T Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3onedata NP302T Series 3 페이지. Serial device server
3onedata NP302T Series에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)
페이지 인쇄No data or abnormal data is being
RX
OFF
received through serial port.
(1-2)
Blinking
Serial port is receiving data.
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Step 4
Click "OK" button to login to the WEB interface of
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device is
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M copper port
10/100Base-T （ X ） self-adapting
RJ45
port,
self-adaption,
self-adaption
RS-232 serial port
RJ45 port
RS-485/422
serial
10-pin 5.08mm pitch terminal
port
block
Indicator
Power indicator, Ethernet port
indicator, Serial port transmission
and receiving data indicator
Power supply
9~48VDC, anti-reverse connection
Input power supply
2-pin 5.08mm pitch terminal block
Access terminal
Consumption
NP302T-2D (RS-232)
No-load: 0.72W@24VDC
Full-load: 0.77W@24VDC
NP302T-2D (RS-485)
No-load: 1.01W@24VDC
Full-load: 1.03W@24VDC
Working
environment
Working temperature
-40~75℃
Storage temperature
-40~85℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
full/half
duplex
MDI/MDI-X