AnyTone AT-D578UV 사용자 설명서 - 페이지 4
{카테고리_이름} AnyTone AT-D578UV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone AT-D578UV 4 페이지. Bluetooth(bt)
AnyTone AT-D578UV에 대해서도 마찬가지입니다: 고급 설정 (5 페이지), 펌웨어 업데이트 방법 (17 페이지)
페이지 인쇄
been paired to the radio)
The microphone in the radio. (If BT + int mic is turned on in radio menu)
●
Notice: If the recipients volume is not loud enough with the volume set to
maximum, you can adjust the BT Mic Gain via the menu to a higher level to
achieve a louder transmit volume.
When receiving, the received audio is handled by following methods:
Receive audio can be heard over car audio system or bluetooth earpiece,
●
and it can also be heard over the radio's internal speaker when BT + int
spk is selected in the radio menu.
The volume can be controlled by car audio system or bluetooth earpiece
●
volume setting. It can also be controlled by the volume knob on the radio.
Notice: If the received audio level is not loud enough even if you set the
radio volume to maximum, you can adjust the BT Spk Gain in the menu to
a higher level to get a louder received volume.
Important Notice:
Although Bluetooth version 4.2 is compatible to many newer car
●
entertainment systems, it cannot be guaranteed that it will work with
all of these devices.
Anytone will continue to improve the Bluetooth system to allow more
●
car models to be connected to our radios. Updating of the Bluetooth
firmware in the radio and in the PTT module may be required to
achieve these improvements.
4
A4.200611