AnyTone MINI CB 사용자 설명서 - 페이지 3
{카테고리_이름} AnyTone MINI CB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone MINI CB 4 페이지.
페이지 인쇄
RF Gain contro
11
Short press
21
Short press microphone [
31
Short press
Note：When RFG function is on the LCD displays R if RFG level is 6 means the
attenuation is 6dBm.
Emergency Channel
11
Short press
21
Short press
31
Short press
Keypad Lock
11
Hold
key for over 2 seconds to lock the keys, LCD displays "LC".
21
Hold
key for over 2 seconds again to unlock the keys, LCD displays OF.
Note：In lock Mode all keys except PTT is valid.
Scan function
11
Hold
to start scan function, "SC" falshes in the LCD;
21
Press [
UP ] or [ DN ] to change scan direction during scan;
31
Press
or [PTT] key to exit scan function.
Norms control
11
Hold
to power on radio, until LCD displays the norms;
21
Press [
UP ] or [ DN ] to choose wanted norms;
31
Power off and power on again.
Install external speaker
Choose a 8Ω external speaker with 3.5mm mono connector.
Resume factory default
11
Hold
key to power on radio, until the LCD displays "RT", the resume work
finish.
21
All channel and function setting will resume factory default after above operation.
key, LCD displays R and the present RF gain level flashes.
UP ] or [ DN ] to change level.
key to exit RF gain level control.
key to choose CH9, the channel number flashes.
key again to choose CH19, the channel number flashes.
key third time to return to last normal channel.