AnyTone D578UV 펌웨어 업데이트 지침

{카테고리_이름} AnyTone D578UV에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone D578UV 3 페이지. Bt01 microphone
AnyTone D578UV에 대해서도 마찬가지입니다: 펌웨어 업데이트 방법 (17 페이지), 지침 (3 페이지)

페이지 인쇄

* Note: Once the radio is put in the FW update mode you must complete the FW

Update Write to prevent the radio from staying in the Update Mode **

1.) Power the radio "ON".

2.) Press and Hold both the MENU and EXIT keys.

Now power the radio "OFF"

3.) The red LED light should now blinking, and the radio has entered into firmware update

mode.

4.) Use the USB cable to connect radio to your PC.

5.) Open the radio Computer Programming Software (CPS) and go to TOOLS > Firmware

Update

6.) Select the Open File button and select the appropriate D578UV.spi file in the FW Update

folder

7.) Check and Set the Com Port that is correct for your PC connected to the radio.

8.) Select the Write button to write the new FW to the radio.

9.) After the firmware update is finished, you must perform a Reset of the Radio (MCU

Reboot).

D578UV Mobile Radio

Firmware Update Instructions